http://www.thelagoodtimes.com/refrigerated-curved/
About Energy Saver Principles by hi joiney
First, energy-saving principle
Fan and pump saver specific design goal is to “control the flow of fluid machinery, maximum energy saving and automation,” the load by sensing changes in real-time adjustment of motor output power to achieve energy saving purposes.
As the fan and pump system design margin factor is too large, taking up by single selection of files, rather large not to small, eventually leading to system load lighter. Most fans, pumps have to rely on damper or valve to reduce expenses, artificially increasing the resistance of pipe network to reduce the flow, pressure drop increase, at a time when fans, water pump characteristic curve remains unchanged, the same blade speed, not much less input power. Therefore, when the flow changes, it will waste a lot of power. In addition, the way in cutting regulation, electric motors, fans, pumps and other long-term at high speed, running under load, caused by large amount of maintenance, equipment life and low operating noise and large, affect the environment.
Second, product characteristics
1, energy efficient, saving 20% ~ 68%.
2, built-in PID (proportional, integral, differential), closed loop system can be easily formed.
3, good motor control and protection.
4, soft start, soft stop, extend equipment life and lower maintenance costs.
5, improve equipment grid side power factor, increase network capacity throughout the network.
Central air conditioning Saver
1, control theory
With the world’s most advanced programmable control technology and intelligent sensor technology, by sensing the temperature of refrigeration units to automatically adjust the host and the motor power, constant room temperature of the central air conditioning system in top operating condition to save energy power purposes.
Second, control based on
The cooling water and return water pump as a control based on temperature difference between the temperature difference in order to achieve control. Large temperature difference, heat a large refrigeration unit that should improve the speed, increasing the cooling water circulation rate; temperature difference is small, shows a small refrigeration unit heat can reduce the pump speed, reducing the rate of cooling water to save energy.
Third, run the effect
And reform the system before shipping, compared with the following advantages:
1, saving 20% – 68%;
2, pump pipe network to reduce mechanical wear, reduce equipment maintenance costs;
3, the central air conditioning system is always running at their best, good control results.
Injection molding machine dedicated Saver
Injection molding machine dedicated Saver is a Division I after years of research on injection molding machines, combined with the advantages of its own power electronics, developed the world’s advanced level with special high-technology energy-saving equipment injection molding machine, fully meet the various brands of hydraulic injection molding machine technical requirements, and energy saving. Energy savings of 25% to 65%.
I. Saving Principle
 Injection molding machine power consumption mainly in the following sections:
 1, pump hydraulic system power consumption;
 2, the energy consumption of heating systems;
 3, circulating cooling water pump power consumption;
Pump hydraulic system in which the injection molding machine electricity consumption accounts for more than 80%, so reduce its power consumption is the key to saving injection molding machine. Injection molding machine mold, clamping, Injecting, cooling stages of the pressure and flow are changing, when the injection molding machine measurement needs change, exports from the relief valve in oil pump pressure to adjust the load and flow, the electrical output power remains unchanged, resulting in energy waste. Our dedicated saver use closed loop control, injection molding machine by detecting the voltage sensor and the flow signal, automatically adjust pump speed, so that fuel supply consistent with the needs of injection molding machine (ie, lower output power), to achieve energy saving.
Second, product characteristics
1, energy saving up to 25% to 68%;
2, lower of hydraulic oil temperature, reducing the amount of cooling water. Prolong life for hydraulic pumps 8 times;
3, reduced motor bearings, oil pump blades and other wear and prolong its service life;
4, power saving, electricity switch free switched, if the saver is running fails, switch to the mains power does not affect production;
5, complete instructions and failure to run query function;
6, to improve power factor, reduce reactive loss, starting with software features, no large current surge during start; keep the original plastic oil pump motors Y / start / run unchanged; on existing injection molding machine hydraulic system and computer control system does not change.
Intelligent Light Saver
I. Introduction
Smart Saver light is pearl Haipu Cheng Electronic Technology Co., Ltd. introduced the system used a highly efficient energy-saving lamp products. The design is the use of microelectronics technology lamp power supply system to optimize power quality. Without affecting the normal use of the premise equipment, it is an optimum power output (optimal illumination), to achieve energy savings and prolong the service life of electrical equipment, a double effect.
Second, energy-saving principle
Intelligent Light Saver energy saving using the latest foreign technology and precision by the microprocessor in real-time dynamic detection and monitoring, to achieve high-power regulator, continuous low current switching technology, and according to the actual needs of optional sub-time control, illumination control mode, centralized control of the remote computer by way of truly intelligent lighting. Once set up control procedures and equipment will be adjusted automatically according to set procedures for lighting load voltage and current balance control output power, improving power factor, achieve energy savings.
About the Author
I am an expert from China Crafts Suppliers, usually analyzes all kind of industries situation, such as rhinestone hot fix, rhinestone hotfix.
True Curved Glass Refrigerated Bakery Display Case Video (TCGR-50)
|
|
RPI Refrigerated/Dry display case dual temperature european style curved front $9,399.00 |
|
|
True TCGDZ-59 Display Case: Curved Glass Dual Zone Dry Refrigerated Bakery Case $8,887.01 |
|
|
True TCGR-77-CD Display Case: Curved Glass Refrigerated Cold Deli Case $8,574.12 |
|
|
True TCGR-77 Display Case: Curved Glass Refrigerated Bakery Case 115V $8,489.21 |
|
|
TRUE TCGR-77 REFRIGERATOR CURVED GLASS DELI CASE 77″ $8,489.21 |
|
|
CURVED GLASS DELI DISPLAY CASE REFRIGERATED TRUE 118″ $8,344.00 |
|
|
True TCGDZ-50 Display Case: Curved Glass Dual Zone Dry Refrigerated Bakery Case $8,260.47 |
|
|
True TCGR-59-CD Display Case: Curved Glass Refrigerated Cold Deli Case $8,245.17 |
|
|
True TCGR-59 Display Case: Curved Glass Refrigerated Bakery Case 115V $8,109.00 |
|
|
TURBO AIR REFRIGERATED 59″ CURVED BAKERY CASE TB-5R $7,940.00 |
|
|
NEW TURBO AIR REFRIGERATED BAKERY CASE 11.1 x 2 CU FT TCGB-72-CO CURVED FRONT $7,889.51 |
|
|
Turbo Air TCGB-72-CO 72″ Curved Glass Dry and Refrigerated Bakery Display Case $7,889.51 |
|
|
True TCGR-50-CD Display Case: Curved Glass Refrigerated Cold Deli Case $7,755.95 |
|
|
TRUE TCGR-50CD REFRIGERATOR CURVED GLASS DELI CASE 50″ $7,755.95 |
|
|
NEW TURBO AIR REFRIGERATED BAKERY CASE 9.2 X 2 CU FT TCGB-60-CO CURVED FRONT $7,741.80 |
|
|
Turbo Air TCGB-60-CO 60″ Curved Glass Dry and Refrigerated Bakery Display Case $7,741.80 |
|
|
True TCGR-50 Display Case: Curved Glass Refrigerated Bakery Case 115V $7,578.09 |
|
|
TRUE TCGR-50 REFRIGERATOR CURVED GLASS BAKERY CASE 50″ $7,578.09 |
|
|
REFRIGERATED BAKERY DISPLAY CASE CURVED GLASS 59 7/8″ $7,559.00 |
|
|
TURBO AIR REFRIGERATED 48″ CURVED BAKERY CASE TB-4R $7,520.00 |
|
|
NEW TURBO AIR REFRIGERATED DELI CASE 28.8 CU FT TCDD-96-4-H CURVED FRONT GLASS $7,504.20 |
|
|
NEW TURBO AIR REFRIGERATED DELI CASE 19.2 CU FT TCDD-96-4-L CURVED FRONT GLASS $7,504.20 |
|
|
TURBO AIR 8 ft Curved Glass Low Refrigerated Deli Case CALL NOW FOR “SALE PRICE” $7,504.20 |
|
|
TURBO AIR 8 ft Curved Glass High Refrigerated Deli Case CALL NOW FOR”SALE PRICE” $7,504.20 |
|
|
True TCGG-72-S Display Case: Stainless Curved Glass Refrigerated Deli Case $7,453.01 |
|
|
NEW TURBO AIR REFRIGERATED BAKERY CASE 22.73 CU FT TCGB-72-2 CURVED FRONT GLASS $7,372.33 |
|
|
True TCGG-72 Display Case: Curved Glass Refrigerated Deli Case $7,226.57 |
|
|
CURVED GLASS DELI DISPLAY CASE REFRIGERATED TRUE 96″ $7,212.00 |
|
|
True TCGR-36 Display Case: Curved Glass Refrigerated Bakery Case 115V $7,135.54 |
|
|
NEW TURBO AIR REFRIGERATED BAKERY CASE 18.79 CU FT TCGB-60-2 CURVED FRONT GLASS $7,102.66 |
|
|
NEW TURBO AIR REFRIGERATED BAKERY CASE 14.85 CU FT TCGB-48-2 CURVED FRONT GLASS $7,053.55 |
|
|
True TCGG-60-S Display Case: Stainless Curved Glass Refrigerated Deli Case $6,802.38 |
|
|
True TCGG-60 Display Case: Curved Glass Refrigerated Deli Case $6,634.08 |
|
|
NEW TURBO AIR REFRIGERATED DELI CASE 21.4 CU FT TCDD-72-2-H CURVED FRONT GLASS $6,598.55 |
|
|
NEW TURBO AIR REFRIGERATED DELI CASE 14.2 CU FT TCDD-72-2-L CURVED FRONT GLASS $6,598.55 |
|
|
TURBO AIR 6ft Curved Glass Refrigerated High Deli Case CALL NOW FOR “SALE PRICE” $6,598.55 |
|
|
TURBO AIR 6 ft Curved Glass Low Refrigerated Deli Case CALL NOW FOR “SALE PRICE” $6,598.55 |
|
|
SN773SC Federal Half Refrigerated and Dry Bakery Display Case, Curved Glass USED $6,500.00 |
|
|
77″ Refrigerated High Volume Bakery Case, Curved Glass $6,359.00 |
|
|
True TCGR-31 Display Case: Curved Glass Refrigerated Bakery Case 115V $6,249.67 |
|
|
CURVED GLASS DELI DISPLAY CASE REFRIGERATED TRUE 72″ $6,139.00 |
|
|
True TCGG-48-S Display Case: Stainless Curved Glass Refrigerated Deli Case $6,126.12 |
|
|
5′ Refrigerated High Volume Bakery Case, Curved Glass $6,096.00 |
|
|
4′ refrigerated High Volume Bakery Case, Curved Glass $6,082.00 |
|
|
True TCGG-48 Display Case: Curved Glass Refrigerated Deli Case $5,964.32 |
|
|
NEW TURBO AIR REFRIGERATED BAKERY CASE 10.92 CU FT TCGB-36-2 CURVED FRONT GLASS $5,870.30 |
|
|
CURVED GLASS DELI DISPLAY CASE REFRIGERATED TRUE 60″ $5,688.00 |
|
|
True TCGG-36-S Display Case: Stainless Curved Glass Refrigerated Deli Case $5,650.67 |
|
|
True TCGG-36 Display Case: Curved Glass Refrigerated Deli Case $5,522.15 |
|
|
NEW TURBO AIR REFRIGERATED DELI CASE 13.9 CU FT TCDD-48-2-H CURVED FRONT GLASS $5,460.84 |
|
|
NEW TURBO AIR REFRIGERATED DELI CASE 9.3 CU FT TCDD-48-2-L CURVED FRONT GLASS $5,460.84 |
|
|
TURBO AIR 4 ft Curved Glass Refrigerated High Deli Case CALL NOW FOR”SALE PRICE” $5,460.84 |
|
|
TURBO AIR 4 ft Curved Glass Low Refrigerated Deli Case CALL NOW FOR “SALE PRICE” $5,460.84 |
|
|
77″ REFRIGERATED CURVED GLASS BAKERY CASE $5,455.00 |
|
|
TRUE TCGG-72 (6 Foot) CURVED GLASS REFRIGERATED DELI CASE $4,995.00 |
|
|
Turbo Air TCGB-72-DR 72″ Curved Glass Non-Refrigerated Bakery Display Case 115V $5,365.40 |
|
|
NEW TURBO AIR REFRIGERATED DELI CASE 10.2 CU FT TCDD-36-2-H CURVED FRONT GLASS $5,005.84 |
|
|
NEW TURBO AIR REFRIGERATED DELI CASE 6.8 CU FT TCDD-36-2-L CURVED FRONT GLASS $5,005.84 |
|
|
TURBO AIR 3ft Curved Glass High Refrigerated Deli Case CALL NOW FOR “SALE PRICE” $5,005.84 |
|
|
TURBO AIR 3 ft Curved Glass Low Refrigerated Deli Case CALL NOW FOR “SALE PRICE” $5,005.84 |